When to Use Pump Volute Casing？

The volute casing pump is the most common type of centrifugal pump. Its characteristic feature is the volute-shaped pump casing which is typical for single-stage centrifugal pumps.

Goto SGB to know more.

There are designs whose main dimensions are standardised in accordance with EN 733, ISO and ISO , but this standardisation still leaves ample room for many design variants. See Figs. 1 to 6, Volute casing pump 

The volute casing pump is usually a single-stage design, but sometimes incorporates two stages (see Multistage pump).
See Fig. 2 Pipeline pump

Both single-suction and double-suction variants are common (see Double-suction pump). Impellers can be of either radial or mixed flow type, as defined by the specific speeds of approx. 12 to 70 rpm (in individual cases up to 100 rpm and higher).

The axial thrust can be balanced by 

• Thrust bearings
• Balancing holes in the impeller shroud, often combined with a second sealing clearance on the impeller side
  See Figs. 1 and 2 Volute casing pump
  See Figs 7, 8 and 10 Axial thrust
• Back vanes See Fig. 9 Axial thrust
• Impellers in back-to-back arrangement on double-suction or two-stage volute casing pumps
  See Figs. 3 and 4 Axial thrust
  See Figs. 18 and 19 Impeller

The pump casing can be

• Radially split relative to the shaft (see Radially split design)
  See Fig. 1, 2, 4, 5 Volute casing pump
• Axially split at shaft centreline (see Axially split design)
  See Fig. 3 Volute casing pump

A volute casing pump can be avertical or horizontal pump and the pump shaft can be supported by rolling element bearings or plain bearings on one side only or on either side of the impeller.

On a horizontal volute casing with an overhung impeller, the bearing unit is integrated:

• In the drive
  see Fig. 2 Volute casing pump (also see Closed-coupled pump) 
• In the bearing bracket
  see Figs. 1, 4 Volute casing pump
• In the support bracket
  see Fig. 5 Volute casing pump 

The bearing bracket is designed for a pump in back pull-out design. The support bracket has the advantage of being able to directly transmit the radial and axial forces from the impeller via the shaft to thepump foundation and enables smaller baseplates to be used.

The pump discharge nozzle can be arranged either tangentially on the volute casing or radially in the shaft plane through the provision of a "gooseneck". It can be arranged at the top, bottom or sides of the volute casing, providing it does not interfere with the pump feet on the casing.
Thepump suction nozzle  of volute casing pumps with an overhung impeller (cantilever pumps) is frequently arranged axially, and either radially or tangentially in the case of in-line pumps and volute casing pumps in between-bearings design.

Instead of radial or mixed flow impellers, special impellers such as single-channel or multi-channel impellers can be fitted if required. A diffuser is sometimes fitted between the impeller and volute of large volute casing pumps to improve the pump efficiency and balance the radial thrust.

A double volute, i.e. two axially symmetrical volutes that are offset by 180° but normally have a common discharge nozzle, also serves to balance the radial thrust.
See Fig. 6 Volute casing pump

Depending on the fluid handled or the degree of maintenance required, a variety of different shaft seals can be fitted. It is also possible to heat or cool the volute casing pump, e.g. when used for chemical processes. See Fig. 12 Pump casing

Volute casing pumps are designated according to their

• Drive, e.g. canned motor pump or closed-coupled pump
• Application, e.g. water supply pump, marine pump, chemical pump or fire-fighting pump
• Fluid handled, e.g. waste water and sewage pump, pulp pump or heat transfer pump
• Volute casing material, e.g. plastic or concrete volute casing pump

The term volute casing pump can therefore only express one of several aspects.

Volute pumps are a cornerstone in many industrial pumping systems, driving efficiency and reliability in fluid handling operations. Whether in water treatment, chemical processing, or oil and gas production, volute pumps play a vital role in managing fluids across varying conditions. However, to truly harness the capabilities of these pumps, a deep technical understanding of their design, components, and performance factors is essential.

This blog aims to provide a detailed exploration of volute pump performance. From understanding the core structure, including the pump casing, impeller, discharge flange, discharge port and pump shaft and others, and the mechanics of volute pumps to recognizing how design modifications can impact efficiency, we will cover the most critical factors for optimizing volute pump performance. Through technical insights into single and double volute pumps, Computational Fluid Dynamics (CFD) simulations, split volute casing, and industrial customization, you will gain the knowledge needed to maximize pump efficiency and minimize operational costs.

The Core Structure: What is a Volute in a Centrifugal Pump?

At the heart of every volute centrifugal pump lies the volute, a spiral-shaped casing designed to manage pump flow and pressure within the pump. The volute serves two primary purposes: directing fluid from the impeller to the discharge point and converting the fluid’s kinetic energy into pressure energy. This pressure buildup is crucial for ensuring efficient fluid transfer through the volute centrifugal pump system, especially in industrial applications that demand precise flow control.

When fluid leaves the impeller, it has high velocity but relatively low pressure. The volute slows the fluid down, creating a pressure gradient that facilitates its movement through the system. This process—known as diffusion—reduces energy losses and ensures that the volute centrifugal pump operates efficiently.

The geometry of the pump volute is a key factor in its ability to perform this energy conversion. A properly designed pump volute guides fluid smoothly, minimizing turbulence and pressure losses as the impeller rotates. In contrast, a poorly designed pump volute can lead to inefficiencies, cavitation (the formation of vapor bubbles), and ultimately, reduced pump lifespan.

Pressure Conversion and Flow Direction

Understanding the relationship between pressure and flow direction in a volute pump is essential for optimizing pump performance. As the fluid moves outward from the impeller, its velocity decreases, and its pressure increases. This pressure boost is vital for overcoming system resistance, especially in applications where fluid needs to be moved over long distances or to elevated locations.

Additionally, the volute helps direct fluid from the impeller toward the pump outlet, playing a key role in determining the pump’s overall efficiency. Smooth fluid flow minimizes turbulence and helps maintain consistent pressure throughout the system, making volute centrifugal pumps more reliable in industrial operations.

Volute Pumps vs. Diffuser Pumps

Volute pumps are often compared to diffuser-style centrifugal pumps, which use multiple vanes to direct fluid flow from the impeller to the outlet. While diffuser pumps can provide a more gradual pressure increase, volute centrifugal pumps are generally considered more efficient for industrial applications, particularly when handling higher flow rates and more viscous fluids. Diffuser pumps tend to create more turbulence, which can lead to energy losses and reduced efficiency compared to volute pumps.

Different Types of Volute Pumps: Single vs. Double Volute

Volute pumps come in two distinct types: single-volute and double-volute. Each type offers unique advantages and is suited for different operational environments.

Single Volute Pumps

Single-volute pumps feature a continuous spiral casing around the impeller. This simple design makes them highly efficient in low-flow applications where the forces acting on the impeller are balanced. Because single-volute pumps have only one flow channel, they are often used in situations where radial forces—sideways forces exerted on the impeller—are not a significant concern.

However, as flow rates increase, radial forces become more pronounced, leading to potential imbalances and vibration. In high-flow applications, this imbalance can cause excessive wear on the pump’s bearings and shaft, resulting in shorter service life and higher maintenance costs.

Double Volute Pumps

In contrast, double-volute centrifugal pumps feature two volute channels that symmetrically divide the fluid flow around the impeller. This design helps to balance radial forces, reducing the likelihood of vibration and wear. Double volute pumps are better suited for high-flow, high-pressure applications where the risk of radial force imbalance is greater. By distributing the fluid evenly on both sides of the impeller, double-volute pumps offer improved stability and reduced wear on critical components.

Double-volute centrifugal pumps are particularly beneficial in applications involving abrasive or corrosive fluids. The balanced forces help prevent premature damage to the pump’s internal components, making them a preferred choice for industries such as mining, chemical processing, and wastewater treatment.

Operational Challenges and Advantages

Both single- and double-volute pumps have their place in industrial operations. Single-volute pumps are ideal for low-flow, low-pressure applications where simplicity and cost-effectiveness are priorities. However, in applications where vibration, cavitation, or high radial forces are a concern, double-volute pumps offer superior performance and longevity.

In some cases, choosing between a single and double volute pump comes down to balancing operational efficiency against initial investment costs. While double-volute pumps typically cost more upfront, their longer service life and reduced maintenance needs can make them a more cost-effective option in the long run.

Pump Volute Design and the Dynamics of Fluid Flow

The design of the pump volute significantly impacts fluid flow dynamics, pressure generation, and overall pump efficiency. Engineers spend considerable time optimizing volute centrifugal pump designs to ensure that the pump operates at peak efficiency, minimizes energy consumption, and reduces wear on internal components.

The Role of Volute Shape in Fluid Flow

The volute’s spiral shape is critical for ensuring smooth fluid flow and efficient pressure conversion. As fluid exits the impeller, it travels through the pump volute, gradually slowing down as it moves toward the discharge. This controlled deceleration is what allows the volute pump to convert the fluid’s velocity energy into pressure.

However, designing the perfect pump volute requires careful consideration of fluid dynamics. A volute that is too narrow can cause excessive pressure buildup, leading to inefficiencies or even cavitation. On the other hand, a volute that is too wide may result in lower pressure and reduced flow rates.

Want more information on Pump Volute Casing? Feel free to contact us.

Computational Fluid Dynamics (CFD) Simulations

Modern pump engineers rely heavily on Computational Fluid Dynamics (CFD) simulations to optimize volute pump design. CFD uses mathematical models and algorithms to simulate how fluids will behave within a volute centrifugal pump, providing insights into flow patterns, pressure distribution, and areas of turbulence. By using CFD, engineers can identify potential design flaws and make adjustments to improve efficiency before the volute centrifugal pump is manufactured.

For example, a CFD simulation might reveal that adjusting the angle of the volute’s discharge throat can reduce turbulence, improve pressure conversion, and increase overall volute pump efficiency. Although small, these design tweaks can significantly impact the pump’s performance in real-world applications.

The Impact of Volute Modifications

In industrial settings, small modifications to the pump volute design can yield substantial performance improvements. For instance, changing the volute’s curvature or adjusting its cross-sectional area can optimize the volute pump’s ability to handle specific fluid characteristics, such as viscosity or temperature.

In cases where fluid properties fluctuate—such as in chemical processing or oil and gas operations—adjusting the volute centrifugal pump design can help maintain consistent pump performance, even under varying conditions. By fine-tuning the pump volute to match the exact demands of the application, operators can improve efficiency, reduce energy consumption, and extend the life of the volute pump.

Split Volute Casing: Simplifying Maintenance for Industrial Pumps

Maintenance is a critical concern for any industrial operation, particularly pump systems. Unplanned downtime can result in significant financial losses, making it essential to choose pump designs that simplify maintenance and reduce the risk of unexpected breakdowns. Split volute casing is one design innovation that addresses these concerns.

What is a Split Volute Casing?

A split volute casing refers to a pump design in which the volute casing is divided into two parts, typically along the horizontal axis. This split allows for easy access to the volute pump’s internal components, such as the impeller and shaft, without removing the entire pump from the system.

Split volute casing designs allow technicians to quickly access the pump’s interior, drastically reducing the time and effort required for maintenance, inspections, and repairs. This can be particularly beneficial in industries where pumps operate continuously, such as water treatment plants or chemical manufacturing facilities.

Material Choices for Split Volute Casings

The materials used in split volute casings play a crucial role in determining the volute centrifugal pump’s durability and resistance to corrosion or wear. Common materials include stainless steel, cast iron, and specialized alloys, each with different benefits depending on the application.

For example, stainless steel is often used in applications involving corrosive fluids, such as in chemical processing or marine environments. Cast iron, on the other hand, is commonly used in general-purpose applications where strength and durability are essential, but corrosion resistance is not a primary concern. Specialized alloys, such as duplex stainless steel or titanium, are typically used in extreme environments where both corrosion and wear resistance are necessary. Choosing the right material for the split volute casing can significantly impact the longevity and performance of the volute centrifugal pump in harsh industrial environments.

Cost Savings Through Simplified Maintenance

One of the primary advantages of split volute casing designs is the potential for cost savings. By reducing the time required for maintenance and repairs, these pumps can significantly lower operational expenses over the life of the equipment. Split volute casing allows for more frequent inspections, helping operators identify potential issues before they lead to costly breakdowns. In industries where downtime is highly expensive, the ease of access provided by split volute casing can be a game-changer in maintaining uninterrupted operations.

Achieving Peak Efficiency: Optimizing Volute Pumps for Industrial Applications

Maximizing the efficiency of volute pumps is a priority for industrial operators, particularly in applications where energy consumption and operational costs are closely monitored. Achieving peak efficiency involves proper component matching, design optimization, and careful monitoring of key performance metrics.

Key Metrics for Assessing Volute Pump Efficiency

Several key metrics, including head, flow rate, and net positive suction head (NPSH), are used to evaluate the efficiency of a volute centrifugal pump. Each provides insights into how effectively the volute pump is operating.

• Head refers to the height to which a volute pump can raise fluid and is a measure of the pressure generated by the pump. A higher head indicates greater pressure output, which is often necessary in applications where fluids need to be moved over long distances or to elevated locations.
• Flow rate measures the volume of fluid moved by the volute pump within a specific time frame. Ensuring the proper flow rate is essential for maintaining consistent fluid transfer in industrial processes.
• NPSH is a critical factor in preventing cavitation, a phenomenon that occurs when vapor bubbles form within the volute pump and collapse, damaging the impeller and other components. Maintaining adequate NPSH is essential for ensuring long-term pump performance and reliability in any volute centrifugal pump.

The Importance of Impeller and Volute Matching

One of the most critical factors in optimizing volute pump efficiency is ensuring that the impeller and pump volute are properly matched. The impeller’s design—including its diameter, blade angle, and rotational speed—must be compatible with the pump volute to ensure smooth fluid flow and efficient pressure conversion.

If the impeller and pump volute are not properly matched, the volute centrifugal pump may experience turbulence, cavitation, or energy losses, leading to reduced performance and a shorter service life. Conversely, when the impeller and pump volute are correctly paired, the volute pump operates more efficiently, with reduced energy consumption and longer intervals between maintenance checks.

Small Adjustments for Big Gains

Even small adjustments to the pump volute design can lead to significant gains in efficiency. For example, modifying the volute’s discharge angle or adjusting the size of the volute throat can optimize fluid flow characteristics, reduce turbulence, and improve pressure conversion.

In many cases, these adjustments can be made without the need for a complete redesign of the volute centrifugal pump, making them a cost-effective way to improve efficiency. For industries where fluid properties or flow rates fluctuate frequently, the ability to make small, targeted adjustments to the pump volute design can be invaluable.

The Role of Split Volute Casing in Reducing Downtime

Downtime is one of the biggest challenges faced by industrial operators, particularly in industries where pumps operate continuously. Unplanned downtime can lead to significant financial losses, making it essential to choose pump designs that reduce the risk of unexpected breakdowns. Split volute casing designs are a powerful tool for minimizing downtime and improving system reliability.

Improving Uptime with Split Volute Casing

One of the primary advantages of split volute casing pumps is their ability to reduce the time required for maintenance and repairs. Because the volute casing is split into two parts, technicians can access the volute centrifugal pump’s internal components without the need to remove the entire pump from the system. This reduces the time required for routine inspections, maintenance, or repairs, allowing the volute pump to return to service more quickly.

In industries where volute pumps operate continuously, such as in water treatment plants or chemical processing facilities, minimizing downtime is essential for maintaining productivity and avoiding costly interruptions. Split volute casing pumps provide a practical solution by simplifying maintenance and reducing the time required for service.

Case Studies: Reduced Maintenance Costs with Split Volute Pumps

Many industries that have adopted split volute casing pumps have reported significant reductions in maintenance costs and improved overall system reliability. For example, a chemical processing plant using split volute casing pumps was able to cut its annual maintenance budget by 20% by reducing the time required for routine maintenance and inspections.

In another case, a water treatment facility using split volute casing pumps reported a 15% increase in uptime, thanks to the pump’s ability to be serviced quickly and efficiently. These case studies demonstrate the value of split volute casing pumps in reducing downtime and improving operational efficiency.

Monitoring and Maintaining Split Volute Pumps

To further reduce downtime, many modern split-volute casing pumps are equipped with advanced monitoring technologies, such as vibration sensors, temperature monitors, and pressure gauges. These tools provide real-time data on the volute pump’s performance, allowing operators to detect potential issues before they lead to significant failures.

By using these monitoring tools, operators can extend the life of their volute centrifugal pumps, reduce the frequency of maintenance checks, and improve overall system reliability. In addition, regular monitoring can help identify trends in volute pump performance, allowing operators to make informed decisions about when to service or replace critical components.

Customizing Volute Pumps for Specific Industrial Needs

While standard volute pump designs are sufficient for many applications, some industries require customized solutions to meet unique operational challenges. Customizing a volute centrifugal pump allows operators to tailor the pump to specific fluid characteristics, environmental conditions, and operational demands, resulting in improved performance and longevity.

Tailoring Volute Pumps for Unique Applications

Industries that deal with extreme temperatures, high fluid viscosities, or abrasive materials often require customized volute pump solutions. For example, in the oil and gas industry, volute centrifugal pumps may need to handle highly viscous fluids at elevated temperatures. In contrast, in the mining industry, pumps must be able to handle abrasive slurries without experiencing excessive wear.

By customizing the pump volute design, impeller configuration, and material selection, operators can ensure that the volute centrifugal pump is optimized for the application’s specific demands. This can result in improved efficiency, reduced energy consumption, and longer service life.

Material Considerations: Stainless Steel, Cast Iron, and Specialized Alloys

The choice of material for a volute pump is one of the most critical factors in determining its long-term durability and resistance to wear. Stainless steel is often used in applications where corrosion resistance is a priority, such as in chemical processing or marine environments. Cast iron is commonly used in general-purpose applications where strength and durability are essential, but corrosion resistance is not a primary concern.

For more extreme environments, specialized alloys such as duplex stainless steel, titanium, or Hastelloy may be required. These materials offer superior resistance to both corrosion and wear, making them ideal for volute centrifugal pumps handling abrasive fluids or harsh chemical environments.

Customizing for Industry-Specific Challenges

Customized volute pumps can address a wide range of industry-specific challenges, such as handling fluids with high solids content, managing varying flow rates, or maintaining efficiency in extreme temperature conditions. By working closely with pump manufacturers, operators can develop tailored volute centrifugal pump solutions that meet their unique operational needs.

For example, a wastewater treatment plant might require a volute pump capable of handling high solids content without clogging. At the same time, a chemical processing facility might need a pump that can handle highly corrosive fluids at elevated temperatures. In each case, customizing the pump volute design, material selection, and impeller configuration can help solve these challenges and ensure reliable performance.

Conclusion

Mastering the design and operation of volute pumps is essential for achieving optimal performance in industrial fluid handling systems. By understanding the core structure of volute pumps, recognizing the differences between single and double volute designs, and making targeted modifications to the pump volute geometry, operators can significantly improve pump efficiency and reduce operational costs.

In addition, innovations such as split volute casing designs offer practical solutions for simplifying maintenance and reducing downtime. In contrast, customized volute pumps can address industry-specific challenges and ensure reliable performance in even the most demanding environments.

As industries continue to evolve, the role of volute pumps in optimizing fluid management will only grow in importance. By staying ahead of the curve and investing in the latest advancements in volute centrifugal pump design, operators can ensure that their systems operate efficiently, reliably, and cost-effectively for years to come.

Are you interested in learning more about Industrial Slurry Pumps? Contact us today to secure an expert consultation!