What is a 19 pin HDMI cable?

Two aspects are particularly important for demanding gamers:

A high resolution for the best possible graphics and a high frame rate (FPS) for a smooth and lag-free display.

High-performance desktop PCs often have gaming monitors attached that support a higher refresh rate than most living room TVs. Hertz numbers of over 60 or even over 120 Hz are common, provided the hardware can also handle these speeds in high resolutions. Which HDMI cables are suitable for this?

Even for demanding gaming, Premium High Speed HDMI cables (HDMI 2.0) are still suitable in many cases. Especially with full details and ray tracing, 4K resolution pushes even highly equipped PCs to their limits and does not exceed 60 frames per second. At least 144 Hz is possible in the compromise resolution of p ( x ), which is popular with gamers. HDR is also supported.

However, the successor HDMI 2.1 in the form of Ultra High Speed HDMI cables is already a worthwhile investment for real future proofing the cabling and also for current high-end PCs. This enables 4K gaming at ultra-fast 120 Hz, p even up to 240 Hz. On the console side, there are already a few games on the Microsoft Xbox® Series X that reach 4K@120Hz. Televisions with HDMI 2.1 can also already be found in living rooms, even if they are still a long way from the mass market.

For more information, please visit our website.

HDMI female connectors are usually built into both the signal source and the receiving device as sockets for a male-end cable. In the most common arrangement, a cable with two male ends is plugged into two female sockets simultaneously. This provides direct wired connectivity between the source and display devices.

As female HDMI connectors are usually recessed into the body of TVs, games consoles, projectors, computers, and monitors - and because they tend to be more susceptible to deforming under excessive strain than male connectors - they're more widely sold as standalone replacement parts.

AIKE Electronics supply professional and honest service.

Male HDMI connectors, on the other hand, are generally supplied as fixed components at either end of almost every commercially available HDMI cable. In many situations, it's easier and cheaper to replace a damaged male connector by swapping in a replacement cable. However, this isn't always practical. Some high-end HDMI cables can be relatively expensive (especially the longer and sturdier types), and so in these cases, it can be considerably cheaper to wire a new male connector than to replace an entire cable run.

In addition, many people choose to route HDMI cables behind walls or between floors of a building. It can be a complicated process to remove and re-lay these if one of the male connectors gets damaged. For this reason, most reliable suppliers that stock female HDMI sockets also offer equivalent male components.

Want more information on hdmi 19 pins? Feel free to contact us.