The Top 5 Reasons Riders are Choosing Electric Motorcycles

EV Charging and Range

Keren supply professional and honest service.

The thought of an electric motorcycle may give some what is called 'range anxiety', but with a little bit of planning, you'll find that charging can be just as easy as fueling up at a gas station. Both LiveWire ONE and S2 Del Mar come with a charging cable, known as an EVSE, that allows you to charge the bike on a standard 110v US wall outlet. This Level 1 charge will provide approximately 13 miles of range per hour and is best suited for overnight use. S2DM is also compatible with Level 2 (220v) and will charge 20-80% in 78 minutes. LiveWire ONE is one of the few EV motorcycles that accepts a Level 3 DC Fast Charge, and will charge 0-80% in 40 minutes, or 0-100% in just 60 minutes.

The LiveWire ONE will go up to 146 miles on a single charge and the S2 Del Mar gets up to 110 miles on a single charge, with the range dependent on speed and riding conditions. While the ride modes affect the performance and handling of the motorcycle, they do not directly affect the range or the battery charge. As stated above, charging is easy and can be done almost anywhere.

What is a custom electric motorcycle

The custom electric motorcycle is a bespoke two-wheeled vehicle that incorporates an electric powertrain instead of traditional internal combustion engines. They are designed and built to meet specific demands and requirements. These motorcycles embrace innovation by combining cutting-edge electric technology with personalized design elements, resulting in a truly unique and eco-friendly riding experience.

Characteristics of an electric motorcycle

1. Electric motorcycles operate without using fossil fuels, making them environmentally friendly and contributing to a greener future.
2. Electric motorcycles offer instantaneous torque, delivering thrilling acceleration and powerful performance.
3. Electric motorcycles produce significantly lower noise levels than their gasoline-powered counterparts.
4. Electric motorcycles have lower operating costs due to the reduced reliance on fuel and lower maintenance requirements.

Is the battery of a custom electric motorcycle important?

One of the most critical components of a custom electric motorcycle is its battery. Unlike traditional fuel motorcycles, which rely on internal combustion engines, electric motorcycles are powered by lithium-ion batteries. These batteries determine the bike's range, performance, and overall efficiency. A high-quality battery with ample capacity can significantly enhance the riding experience, allowing for longer distances and faster acceleration. Moreover, the battery's charging time and durability are crucial when getting a custom electric motorcycle.

Fuel motorcycles vs. electric motorcycles

a) Electric motorcycles produce zero tailpipe emissions, reducing carbon footprint and improving air quality.
b) Electric motorcycles have lower operating costs, with electricity generally being cheaper than gasoline. Maintenance costs are also usually lower due to fewer moving parts in the electric drivetrain.
c) Electric motorcycles produce minimal noise, providing a smoother and more peaceful riding experience.
d) Electric motors deliver instant torque, resulting in rapid acceleration and thrilling performance.
e) While fuel motorcycles have the advantage of quick refueling compared to charging an electric motorcycle, Electric motorcycles can utilize battery swap station, enabling quick battery replacements and eliminating the need for lengthy charging times.

Advantages and disadvantages of custom electric motorcycles

Custom electric motorcycle offers a range of advantages. Some key benefits include:
a) Custom electric motorcycle offers ample customization opportunities, allowing riders to tailor the bike's appearance, size and features according to their needs.
b) Custom electric motorcycle often features cutting-edge designs that embrace futuristic aesthetics.
c) Electric motorcycles operate silently, eliminating the typical engine noise associated with fuel motorcycles.
d) The parameters of the motorcycle can be adjusted within the feasible range according to the demand, such as the speed and mileage of the motorcycle, etc.
e) Custom electric motorcycles usually have a professional technical team to provide production design and OEM, ODM services.
f) Due to the electric design, intelligent functions can also be customized according to customer needs, such as 4G networking, vehicle condition detection, etc.

Despite their many advantages, custom electric motorcycle also presents a few challenges:
a) The range of electric motorcycles can be a limiting factor, especially for long-distance rides. Therefore, the battery station becomes a good choice. With the battery swap station, electric motorcycles can achieve fast battery replacement at any time without worrying about battery life.
b) Although the charging infrastructure for electric vehicles is rapidly expanding, it may not be as widespread as traditional fuel stations in most regions.
c) Due to the expensive battery technology, custom electric motorcycle can have a higher upfront cost than their counterparts. And the time from order to product delivery is also longer.

Are you interested in learning more about custom electric motorcycle scooter? Contact us today to secure an expert consultation!

How to customize an electric motorcycle

A custom electric motorcycle offers endless possibilities to create a motorcycle product with better performance and more suitable for application scenarios. Here are some key steps to consider when embarking on a customization project:

a) Determine the style, size, aesthetics, logo, specification and performance aspects you want to achieve with custom electric motorcycle.
b) Choose an electric motorcycle model that aligns with your customization goals. Consider factors such as frame design, suspension, and battery technology.
c) Customize the bodywork, paint scheme, and accessories to create a unique visual appeal.
d) Upgrade components such as suspension, brakes, and tires to enhance the handling and performance of custom electric motorcycle.
e) Consider the purpose and target users of the electric motorcycles to plan the parameters of the electric motorcycle batteries. For example, a motorcycle battery pack with a higher voltage usually comes with faster speed and higher efficiency, but the cost will also be higher.
f) Integrate the latest technology in the field of custom electric motorcycle.

Customizing an electric motorcycle for battery swap stations

Making a custom electric motorcycle for battery swap stations requires specific considerations to ensure seamless integration.
a) Choose a battery system compatible with the battery swap stations available in your area.
b) Design the motorcycle's bodywork and battery compartment to allow easy access for battery swaps, minimizing downtime.
c) In addition, the versatility of battery parameters and sizes, as well as the connection form and communication protocol of the power plug need to be considered to ensure that the battery can be used normally in the battery swapping stations.

What to consider when choosing a custom electric motorcycle manufacturer

a) Choose reputable manufacturers with a proven record for high-quality custom electric motorcycle.
b) Assess the manufacturer's customization options to ensure they align with your vision. Consider factors such as frame design, battery capacity, motor power, and aesthetic choices.
c) Pay attention to the manufacturer's choice of battery technology. Lithium-ion batteries are the industry standard for electric motorcycles due to their energy density and performance.
d) Evaluate the motorcycle's performance specifications, including top speed, acceleration, and range. Ensure they meet customers' specific riding needs and preferences.
e) Choose a manufacturer that provides reliable customer support, warranty coverage, and access to service centers or authorized repair facilities.

Tips for building electric motorcycles for your brand

' Research and estimate project budget to get a clear idea of what kind of electric motorcycle you want to build, what features you want to include, and how much money you are willing to spend.
' Depending on company preference and brand identity, you may want to prioritize style or function when building custom electric motorcycle. You can personalize the appearance of bike with paint, decals, lights, accessories, etc., or you can focus on improving the performance and reliability of motorcycle with better components and tuning.

Top custom electric motorcycle manufacturers introduction

Regarding custom electric motorcycle manufacturers, several notable manufacturers stand out. Let's explore a few leading manufacturers in the industry:
a) BENLG: BENLG is a renowned manufacturer known for its cutting-edge design and innovative electric motorcycles. Their bikes are highly customizable and are designed with a focus on delivering exceptional performance and build quality.
b) XYZ Electric Motorcycles: XYZ Electric Motorcycles combines stylish aesthetics with advanced electric technology.
c) Electric Moto Corp: Electric Moto Corp is committed to sustainability and offers custom electric motorcycle that embrace eco-friendly features.

How to charge a custom electric motorcycle?

Charging a custom electric motorcycle is a straightforward process.
a) Use the original standard charger of the motorcycle. An unmatched charger may cause battery damage or even a safety accident.
b) Locate public charging stations. Ensure the charging source is compatible with motorcycle's charging requirements.Connect the charging cable to the motorcycle's charging port and the charging station
c) Battery swap station is another option. Instead of waiting for the battery to get charged, a motorcycle rider can just drive to a nearby battery swapping station to achieve battery swapping just by scanning the code with battery swap app, and swap the drained battery with a fully charged one from a battery swapping cabinet. The whole process takes only 1-2 minutes, which is a big save of time.

How to maintain a custom electric motorcycle?

Proper maintenance is essential to keep custom electric motorcycle in optimal condition.
a) Follow the manufacturer's guidelines for battery maintenance, including regular charging and avoiding complete discharge.
b) Regularly inspect the tire pressure, tread wear, and overall condition of the tires.
c) Periodically inspect the brake pads, rotors, and fluid levels.
d) Keep the chain and other moving parts clean and properly lubricated to ensure smooth operation.

How much does it cost to build your own electric bike?

The cost of building your custom electric motorcycle can vary depending on factors such as components, customization level, and manufacturing processes. It's crucial to consider the following cost elements:
a) The cost of key components, including the battery, motor, controller, and frame, will significantly impact the total cost of your electric bike.
b) If you plan to outsource the manufacturing process, labor costs may vary depending on the location and expertise of the manufacturer.
c) The extent of customization and design complexity will affect the overall cost. Intricate customization may require additional materials, labor, and expertise.

Contact us to discuss your requirements of OEM motor scooter bike. Our experienced sales team can help you identify the options that best suit your needs.

FAQs about custom electric motorcycle