How We Measure Ozone - Air (U.S. National Park Service)
How We Measure Ozone - Air (U.S. National Park Service)
Photo courtesy of Mackenize Reed
For more information, please visit Quanju.
Who is monitoring and where?
Ozone monitoring data are collected in or near 102 national parks! NPS staff and partners operate the monitors in 36 of these locations. Across the United States ozone monitoring is conducted by the Environmental Protection Agency (EPA), states, and other agencies. These groups and the NPS contribute to a nation-wide ozone monitoring network by observing common standards and reporting requirements. EPA's Clean Air Status and Trends Network (CASTNET) is largely responsible for site audits and data are reported to the EPA Air Quality System (AQS).
When selecting ozone monitoring locations the NPS considers:
- Air quality concerns
- Regional representation
- Data gaps
Several national parks also use ozone gardens to monitor the ecological effects of ozone on sensitive plant species.
How often do we measure?
Ozone data are collected continuously (1-minute averages) and reported in one-hour intervals. Because ozone is not stable, it must be measured onsite to accurately determine its concentration in the atmosphere. This also allows us to provide real-time ozone conditions to the public.
An ozone analyzer measures the real-time ozone concentration in the air. Ambient air is drawn through a sampler inlet from the top of a 10-meter tipping tower by a pump. A filter located at the top of the tipping tower removes particles like dust and pollen from the air sample to prevent them from reacting with ozone before it reaches the analyzer.
How Scientists Measure the Ozone
Space Frontiers/Stringer/Hulton Archive/Getty Images
Scientists are able to study the amount of ozone in a given vertical column of atmosphere by using various instruments. One such instrument is an ozonesonde ("sonde" comes from Old English, meaning messenger), which includes a balloon that carries the instrument up more than 21 miles (33.8 kilometers) high to the stratosphere [source: NOAA]. In the stratosphere, it sucks in and holds air to test the amount of ozone gas using an electrochemical concentration cell (ECC). The ECC uses potassium iodide, which reacts with ozone to create an electrical current, to measure the amount of ozone present [source: NOAA]. Although the balloon can burst when it reaches too high of an altitude, the device includes a parachute to reduce damage when it lands.
If you want to learn more, please visit our website ozone monitoring equipment.
In addition to these ozonesondes, aircraft that can fly especially high can also reach the lower stratosphere to measure the ozone in the air. Also, UV detectors on the ground measure how much UV light has penetrated the ozone layer to reach the surface of the earth, which gives us clues as to how much ozone is in the atmosphere. Both ground stations and planes can use lasers to detect ozone, as well.
Advertisement
Other instruments scientists use include instruments on satellites, such as the TOMS (Total Ozone Mapping Spectrometer). The TOMS instrument determines the amount of ozone present in the ozone layer by reading backscattered UV light, which is the UV light the earth emits back into space [source: NASA]. Although the TOMS program closed in after the latest TOMS instrument started failing to transmit information, the program played an important role in revealing the state of the ozone for 30 years [source: Spector]. Meanwhile, different types of instruments have been commissioned to measure the ozone, such as the Ozone Monitoring Instrument (OMI) on the Aura satellite, which also measures backscattered UV light.
Because ozone gas is present among other atmospheric gases in various densities and in various altitudes, determining the "thickness" of the ozone depends on how you look at it. If you brought all the atmospheric ozone gas down to one layer, it would only be about a quarter of an inch thick (0.6 centimeters) [source: Fahey]. But, in reality, ozone gas spreads out in the stratosphere and works with oxygen to protect us. By this measure, the scope of the ozone layer is about 25 miles thick (40 kilometers) [source: Encyclopedia Britannica].
When scientists determine the amount of total ozone, they measure the amount of ozone gas in a column of air. To measure ozone, they use Dobson units (DU), named after a pioneer in ozone research, G.M.B. Dobson. One Dobson unit indicates 0.01 millimeter thickness of ozone gas in a column [source: NASA].
Using these techniques, scientists have been able to determine how much ozone gas is present in the stratosphere. This has led to some disquieting discoveries, which we'll talk about next.
Contact us to discuss your requirements of ozonator for car. Our experienced sales team can help you identify the options that best suit your needs.