How To Drill Your Own Water Well with A DIY Water Well Kit

You will get efficient and thoughtful service from JCDRILL.

Clean drinking water is something that everybody needs to always have access to. Sadly, the problem of water scarcity is rampant in many places all over the world, especially the third world countries. Even in the US, the frequent occurrence of hurricanes has made it imperative to find a way to access more water resources to use during emergencies. A wonderful way of doing so is to create your own water well with the help of the large bore water well kit. 

Check the following video to understand how a DIY Water Well Drilling By Hand works

DIY Water Well ' Here are the steps that you need to follow:

STEP 1: Getting a large bore water well kit

You need to get hold of a large-bore water well kit which contains a 25 feet water well hand pump, a water well auger, a good screen assembly, and a good cap assembly. Along with these you also need to procure pliers, hacksaw, pipe wrenches, PVC primer and cement, parachute cord, well casing, bags of pea gravel and cement, and drill pipes.

STEP 2: Find the appropriate location to dig

Now you need to find the appropriate location for digging. After that, you need to start digging with the help of the water well auger. It is better to go for a 7-inch hole. You need to attach drill pipes to the auger when the hole becomes deeper. The top layer of the soil, clay layer and the water-bearing sand layer need to be penetrated till you reach the second clay layer.

STEP 3: Put the well screen assembly

Now you can put in the well screen assembly after attaching the appropriate length of PVC pipe to it with the help of PVC collars and PVC primer and cement such that a foot of the pipe remains above the ground. The well screen assembly side of the pipe needs to go in first.

STEP 4: Fill the gaps around the PVC pipe

The next step is to fill the gaps around the PVC pipe with the help of pea gravel, the clay which you have dug out, and cement mixed with water to seal the gap.

STEP 5: Insert the pump

Finally, you can put the actual pump inside. This water pump must be assembled by attaching riser pipes and then put into the PVC pipe. You need to flush out the dirty water totally. After that, you need to tie the parachute cord to the end of the pump and attach the other end to the underside of the well cap.

The well cap needs to be installed. Also, the extra layer of PVC pipe around the pump pipe is to be hacked away carefully. This inner pipe has to be cut to the point where you want the pump handle. Just put the handle on to the pipe with a connector.

For more information, please visit best diy well drilling kit.

Your water pump is ready to use whenever you need it! Try out this technique to make your own DIY water well with the large bore water well kit.

Undeniable Benefits of DIY Water Well Drilling Kits

Having reliable, year-round access to clean water is essential for households across the world. With increasingly insecure municipal water supplies and changes to climate conditions, a DIY Water Well is increasing its importance for families in the US.

These are some interesting benefits to consider purchasing or acquiring a DIY Water Well Drilling Kit.

1. DIY Water Well Drilling Offers Independence

One of the key benefits of water well drilling is that it allows you to achieve total self-sufficiency. With your own on-site water supply, you are no longer at the mercy of local municipal water authorities. This means that you will not be subject to any restrictions on water access that authorities might have.

In addition, having your own DIY water well means that you don't have to have the terms of your water access dictated to you by a private water company. No longer will arbitrary price increases and fees eat into your savings or your bottom line. Having your own on-site water well means that you are in control of your water process, allowing you to save time, money, and resources in the long run.

2. Access Higher Quality Water

It's clear that natural groundwater offers health and safety benefits that public water sources may not offer.

The water well drilling process allows your water to benefit from natural filtration through the Earth, providing higher quality water that has not been stripped of its essential minerals. Furthermore, a DIY water well drilling device is often an eco-friendly alternative, as municipal water and the chemical treatment of it has a much greater impact on the natural environment.

3. Enjoy Ease of Maintenance

Finally, it is worth emphasizing the convenience and time savings offered by having your own water well. If you are connected to the public water supply and suffer from a broken pipe or supply issue, then you will have to wait for municipal authorities to come out and fix it, which can often take too long.

Having your own DIY water well means you are insulated from the commonplace problems that often occur with municipal water systems.

The company is the world’s best drill collars supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.