How does a high pressure air booster pump work?

How does a high pressure air booster pumphigh pressure air booster pump work?

A high pressure air booster pump is a device used to increase the pressure of low-pressure gas, such as air, to a high-pressure level. The pump works on the principle of compressing air by increasing its pressure. Here's how it works:

1. The first stage of the pump.

The first stage of the pump is the intake stage. Here, air is drawn into the pump by the opening and closing of the suction valve. The air is then compressed to a specific pressure by the help of a reciprocating piston.

2. The second stage of the pump.

In the second stage of the pump, the compressed air is transferred to the main piston. Here, the compressed air is trapped in the space created by the main piston. The space is called the “power cylinder” and it is designed to be just the right size to hold the compressed air.

3. The third stage of the pump.

In the third stage of the pump, the compressed air is further compressed to an even higher pressure. This is done by the help of a hydraulic booster system that applies pressure, which forces the air out of the power cylinder and into the high-pressure output line.

4. The pressure tank.

After the air leaves the hydraulic booster system, it goes into a pressure tank where it is stored at a high pressure level. The pressure level of the tank can be adjusted to a desired level. The higher the pressure in the tank, the more air it can hold.

5. The safety valve.

A safety valve is a device that is placed in the output line to prevent the pressure from exceeding the desired level. The valve is designed to open when the pressure in the tank reaches a certain level, and to allow some of the air to escape. This helps to prevent the tank from over-pressurizing and damaging the pump.

6. The high-pressure output line.

After the safety valve, the high-pressure output line takes the compressed air to its final destination. This line is used to supply air to various applications, such as pneumatic tools, air rifles, or even for diving.

In conclusion, a high pressure air booster pump works by compressing low-pressure air to a higher pressure level. The compression is achieved by a series of piston movements, hydraulic booster systems, and pressure tanks. By following a structured process, this device is able to supply compressed air to various applications, including those that require high-pressure air.

If you are looking for more details, kindly visit online valve testing, application for gas cylinder transfer.