1 Clay Graphite Crucible [17353] - $9.99
1 Clay Graphite Crucible [] - $9.99
#1 Clay Graphite Crucible. Use for small refining and melting tasks or for lower temperature roasting.
Want more information on 1 Kg Graphite Crucible? Feel free to contact us.
Sold by the Each (1)
Capacity of approximately 1 kilo's of copper.
Outside dimensions: 2.625"(66.675mm) diameter x 2.5"(66mm)" tall
Be sure and check the dimensions before ordering.
Crucible sizes vary between brands. Be sure and check the dimensions before ordering.
Graphite Crucibles for MF- 1 kg (30 oz) Melting Furnace
Replacement graphite crucibles for the MF- 1 kg electric melting furnace.
Long Lasting Top Quality Virgin Graphite-Made Exclusively for Otto Frei-Last Longer-More Economical
Graphite crucibles provide maximum resistance to oxidation while metal is being melted. To avoid contamination use a separate crucible for each metal.
Additional reading:Top Copper Clad Steel Grounding Solutions for Safety
If you want to learn more, please visit our website graphite blocks customized.
This graphite crucible is made from virgin graphite, not compressed graphite, as so many other graphite crucibles on the market are. Our graphite crucibles are heavier then others with a bright shiny smooth surface when new.
The outside measurements of a brand new MF- 1 Kilo capacity gold graphite crucible is 125 mm tall by 65 mm wide (measured at widest point). The crucible measures 50 mm wide below the lip. The inside dimensions are 38 mm across by 115 mm deep. These dimensions will change as the crucible is used as the graphite will wear as it is exposed to heat and air.
Warning: Cancer and Reproductive Harm www.P65warnings.ca.gov
For more information, please visit 600mm graphite crucibles.



