What is a DB9 connector

DB9 connector

DB9 connector, a common type of electrical connector. The term “DB9” refers to a common connector type, one of the D-Subminiature or D-Sub types of connectors. DB9 has the smallest “footprint” of the D-Subminiature connectors, and houses 9 pins (for the male connector) or 9 holes (for the female connector).

Linko are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

The DE-9 D-sub 9-pin connector is often mistakenly referred to as the “DB-9” connector. The “E” refers to the shell size. A “DB-25” connector has a “B” size shell, but the common nine-pin connector is smaller and has an “E” size shell.

Because personal computers first used DB-25 connectors for their serial and parallel ports, when the PC serial port began to use 9-pin connectors, they were often labeled as DB-9 instead of DE-9 connectors, due to an ignorance of the fact that B represented a shell size. It is now common to see DE-9 connectors sold as DB-9 connectors. DB-9 nearly always refers to a 9-pin connector with an E size shell.

Name Pin layout 5-4

Where are DB9 Connectors used?

• Communications ports

The widest application of D-subs is for RS-232 serial communications, though the standard did not make this connector mandatory. RS-232 devices originally used the DB25, but for many applications the less common signals were omitted, allowing a DE-9 to be used.

Many uninterruptible power supply units have a DE-9F connector on them in order to signal to the attached computer via an RS-232 interface. Often these do not send data serially to the computer but instead use the handshaking control lines to indicate low battery, power failure, or other conditions. Such usage is not standardized between manufacturers and may require special cables.

Contact us to discuss your requirements of 9 pin circular connector. Our experienced sales team can help you identify the options that best suit your needs.

• Network ports

DE9 connectors were used for some token ring networks as well as other computer networks. DE-9 connectors are commonly used in CAN: female connectors are on the bus while male connectors are on devices.

• Computer video output
• Game controller ports

You may like our DB9 connector

 

You may also like What businesses does SIGNALORIGIN engage in?

If you’re interested in purchasing 25 pin D-sub connector, be sure to check out the wide range of standard and custom products from SIGNALORIGIN.

Learn more about our Electrical connector 

Contact us

What are DB Connectors?

The DB style connector is a common connector used in many computer, audio/video, and data applications. The official name is D-subminiature, but many people call it "D-sub" or just "DB". The connector gets its name from its trapezoidal shape that resembles the letter "D". Most DB connectors have two rows of pins. Common types of D-sub connectors are DB9 and DB25, used on PCs for serial and parallel ports.

One special type of D-sub connectors is the High-Density DB style, which looks just like a regular DB connector, only with pins that are slightly smaller and placed closer together. This is typically referred to as an "HD" connector. HD connectors often have three rows of pins instead of two. The most common HD connector is the HD15, which is found on PC video cards and monitors. DB and HD connectors use thumbscrews to secure the connector in place.

Another type of D-sub is the MD, or Micro DB connector. This connector is slimmer than a standard D-sub, with pins even smaller than the ones used on HD connectors. The MD is also commonly called a "half-pitch" DB connector. These are often used in SCSI applications, and the most popular types are the MD50 and MD68 connections. MD connectors can use latchclips or thumbscrews as anchoring mechanisms.

D-sub connectors are usually described by the total number of pins that they can hold. In some cases, a DB25 connector may only have 4 or 5 pins loaded into it; however, it is still called a "DB25" connector and not a "DB4" or "DB5". Another example is the HD15 connector used by monitors—most monitor cables only are loaded with 14 pins, but it is still called an HD15 connector.

For more 4 pin circular connectorinformation, please contact us. We will provide professional answers.