A Guide to Shipping Electric Scooters

Goto Keren to know more.

Choosing the best electric scooters for shipping in the US

The first step is to find the best electric scooters that can accommodate your needs. There are several good e-scooters in the market for adults and kids.

Step 1: Consider where you're going to use it

Before purchasing an electric scooter, you need to consider where you'll be using it. If you plan on using this for commuting, then a small model is probably what you want. If you'd like something that can go off-road, then go for something more substantial. Also consider if the e-scooter is designed for adults or kids.

Step 2: What power are you looking for?

The electrical scooter engine's power can be 2 kW, 3 kW, 4 kW, or even more... Motor power varies greatly between models and manufacturers. In general, most electric scooters have motors built into the rear wheel. If your itineraries are hilly or you frequently transport a second passenger, avoid scooters with a rated power of 2 kW or less in the 50cc category. Prefer 3 or 4 kW, knowing that "remote" engines (those that are not integrated into the wheel and are driven by a transmission) are generally more efficient on hills.

Step 3: Take into account the battery autonomy

Simply put, the greater the capacity (measured in kWh), the greater the range. Most electric scooters now come with lithium batteries as standard. However, lead technology is still used in some models, often at low prices. Although it is less expensive to replace, it does not last as long as lithium batteries. They are also heavier and more difficult to keep in good condition.

Step 4 : The charging speed

Depending on the capacity of the battery and the power of its charger (4A, 8A...), the charging time can vary from simple to double. Generally, a higher capacity battery is delivered with a more powerful charger, but this is not always the case. And the charging time can vary from 4h to 8h on a domestic plug.

If you want to learn more, please visit our website sourcing battery operated moped.

Step 5: Weight specifications

It is important to take the weight specifications of an electric scooter into consideration. While small and compact, electric scooters are still not sturdy like a car. This is why an e-scooter can only carry the weight specified. Anything above that weight might cause the electric scooter to break down.

Once again, it is important to choose the best electric scooters which can uniquely address your requirements. Specifications like suspension, electric charge capacity, range, motors, top speed, weight, wheel drive all need to be taken into consideration An electric scooter has the capacity to become a long time ride companion if you choose from the best electric scooters available.

Electric scooters are two-wheeled vehicles powered by electric engines that combine the iconic design of a motor-cycle or scooter with the efficiency and sustainability of electric propulsion.  Electric scooters are an increasingly popular option for urban mobility, offering a clean and efficient alternative to traditional internal combustion vehicles.

How does an electric scooter work?

The engine of an electric scooter works differently from internal combustion engines. Instead of burning fuel, electric scooters use a motor that converts the electric power of the battery into mechanical energy to drive the rear wheel. For this purpose, electronic controllers fitted to the handlebar grip are used to regulate the power delivered to the engine, according to the driver's orders. When the driver turns the accelerator grip, the controller increases the power supplied to the motor, which speeds up the scooter. Some electric scooters have regenerative braking systems that turn part of the kinetic energy produced when the driver applies the brakes into electricity that recharges the battery.

What type of battery is used for electric scooters?

The autonomy of an electric scooter depends on the battery capacity. Lithium-ion batteries are currently the most common. Autonomy typically varies from about 40 km to more than 100 km with a single charge, depending on the model and driving conditions, including the speed chosen, the number of times the scooter stops, the weight of the vehicle and the driver, the gradient of the terrain, the temperature of the environment and other factors.

What are the advantages of electric scooters for urban mobility?

One of the biggest benefits of electric scooters is their low environmental impact. They do not emit any pollutant gases or harmful particles and contribute to reducing air pollution in urban areas.

Another notable feature of electric scooters is that their engines are extremely quiet and do not generate vibrations, producing considerably less noise pollution than their combustion engine counterparts.

Electric scooters have lower operating costs than gasoline-powered vehicles, because, depending on the method by which it is produced, electricity tends to be cheaper than gasoline. Moreover, electric motors require less maintenance than combustion engines.

Because of their characteristics, electric scooters are ideal vehicles for scooter sharing. This is a system for hiring vehicles with payment per hour or per minute to meet the need for a single journey. In many cities, the fleets of shared vehicles, parked on public roads or at specific pick-up points and available for rental through a mobile app, have increased substantially. This form of transport is a more sustainable alternative than the purchase of a vehicle by each user.

What is the difference between this type of scooter and a simple e-scooter?

The term 'electric scooter' can cause confusion in English, as it refers both to a small electric motorbike and a motorized kick scooter with a platform the rider stands on. The latter have become popular in recent years as an alternative form of urban transport. They are light and compact, with a handlebar for steering and a braking system. The motor is located in the base of the platform and is powered by a rechargeable battery. The rider accelerates or brakes using a lever on the handlebar.

Although both electric vehicles have two wheels positioned one before the other, the first serving to steer the vehicle, which remains upright while the driver is traveling, the design and driving position is the most obvious difference between these two types. The basic scooter consists of a narrow horizontal platform that is close to the ground, on which the user normally stands while holding the handlebar, which is attached vertically to the front of the platform. Bike-style electric scooters provide greater comfort.   Their design is based on a normal bike, with an open frame, a comfortable seat and a platform to rest your feet on. The wheels of this type of vehicle are usually smaller than those of conventional motorcycles, but larger than those of kick scooters.

The other major difference is power and autonomy. Basic electric scooters are designed to cover urban distances up to about 20 km, while the autonomy of bike-style scooters usually exceeds 80 km.

Are you interested in learning more about custom electric motor scooter? Contact us today to secure an expert consultation!